adi-insite-ca
ADI a Resideo company
menu

Lowell Manufacturing

Filter Results

Showing  1 - 28 of 226
content loaded
Lowell CMV3-44 Vertical Panel 3X44, 6', Pink
Sign In for Dealer Pricing
STEEL PANEL W FL 1U 12-PK
Sign In for Dealer Pricing
image of yl-acr2009;image of yl-acr2009;image of yl-acr2009;image of yl-acr2009
Sign In for Dealer Pricing
Lowell VCW-12 VELCRO Cable Wraps, 12-Pack, 12, Pink
VCW-12YL-VCW12

Key Features

  • Cable wraps for light-duty settings
  • Holds cables out of the way during installation
  • Maximum bundle diameter 1.75"
  • Hook and loop style
  • Each measures approximately 8" x 0.5"
  • Bag of 12
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    Lowell LWSR-1022 LWSR Series 10U x 22"D Swing Open Wall Mount AV Rack, Steel, Black
    LWSR-1022YL-LWSR1022

    Key Features

  • Backbox has 2 center locks, 16" mounting centers, 10" wide center wiring path, and integral laser-cut section with knockout panels on top / bottom
  • Mounting section connects to backbox with right or left-hand swing and features welded sides with top / bottom vents
  • 1-Pair fixed position mounting rails tapped 10-32, printed RU scale
  • Pilot Point screws with captive washers
  • Beveled corners
  • Black wrinkle textured powder epoxy finish
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    Lowell CMV3-44 Vertical Panel 3X44, 6', Pink
    CMV3-44YL-CMV344

    Key Features

  • Height-21-77" (12-44U)
  • Width- 2, 3.25 or 4.75"
  • Material- Steel (11-gauge for 2.00" wide panels, 16-gauge with flanges for others)
  • Finish- Smooth black
  • Multiple slots and/or tie-off points
  • Sold in packs of six
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-lmb27;image of yl-lmb27;image of yl-lmb27;image of yl-lmb27
    LMB-27YL-LMB27

    Key Features

  • Fully-welded 14-gauge steel construction
  • Black wrinkle powder epoxy finish
  • Center opening for cable management
  • For use with LER, LFR and LGR Series racks. NOTE- The 42" deep base has been discontinued and is available in limited quantities
  • Side openings match openings on LGR Series racks for cable pass-through
  • Includes hardware for bolt-on installation
  • Available with standard swivel casters (1400 lb load capacity, increases rack height 1.25") or fine floor swivel casters to protect wood, marble and tile surfaces (800 lb load capacity, increases rack height 1.5")
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-lfd21fv;image of yl-lfd21fv
    LFD-21FVYL-LFD21FV

    Key Features

  • Extends 1" from rack frame, providing 0.75" space for equipment knobs
  • 20" wide x 1" deep
  • Integral recessed handle
  • Key lock (keyed differently than rack’s rear door)
  • Mounts left or right
  • 180-degree swing
  • Black plugs cover screws for a finished appearance
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    Lowell SMG-1R Rackmount Sound Masking Generator, Analog Pink Noise, 19"x4"x1.75", Black
    SMG-1RYL-SMG1R

    Key Features

  • Generator outputs include high impedance line (RCA jack) and balanced line that can be switched between line level and mic level (terminal strip) for matching input requirements of most commercial equalizers and amplifiers
  • Controls include output level and an adjustable low pass filter that shapes frequencies at 9dB per octave with roll off at 300Hz
  • Also handy for system equalization and audio equipment testing
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-dcp24;image of yl-dcp24
    DCP-24YL-DCP24

    Key Features

  • Features eight outputs (24VDC 8A)
  • Each output is protected by PTC fuse with auto reset for overload protection
  • LED indicates power status (active/inactive)
  • Detachable voltage output terminals (8) with quick-install screw terminal connectors
  • Universal Input- 100-240VAC, 50/60Hz
  • 6'' power cord (C13 to NEMA 5-15P plug)
  • Chassis- 7x6x 1.625''
  • Brackets for horizontal or vertical installation
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-n10pid1
    N10P-ID-1YL-N10PID1

    Key Features

  • 18-gauge steel
  • 0.625" flange
  • Polycarbonate overlay window for paper label (not included)
  • 10 punches for Neutrik D or Switchcraft E connectors (not included)
  • Black and nickel-plated self-tapping screws
  • Black powder epoxy finish
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    STEEL PANEL W FL 1U 12-PK
    SP-1CCYL-SP1CC

    Key Features

  • Material- 18-gauge steel
  • Finish- Black wrinkle textured powder epoxy finish
  • Flange- 0.50"
  • Width- 19"
  • Height-1U-11U (11U panel available in limited quantities)
  • Available in single or multi-pack cartons
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    Lowell KOP-L-PSW Knockout Panel with Light Power Supply
    KOP-L-PSWYL-KOPLPSW

    Key Features

  • 10" Wide steel panel with black powder epoxy finish
  • The LED modules (white light) are angled to illuminate rack interior
  • Power supply (12V DC, 1A output) included with switched models only
  • Proximity switch automatically activates unit when presence is detected
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-dx104;image of yl-dx104;image of yl-dx104
    DX104YL-DX104

    Key Features

  • Welded certified U.S. steel with black powder epoxy finish. Includes receptacles to accept a torsion grille
  • 10" diameter
  • 6.75"D (additional 3/8"D formed flange to attach a screw-mount grille)
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-ler3527;image of yl-ler3527
    LER-3527YL-LER3527

    Key Features

  • Configurable top with 12U opening
  • Welded sides with vents
  • Recessed rear door with key lock
  • Adjustable front rails tapped 10-32
  • Multiple lacing points, laser-cut knockout panels
  • Pilot Point screws with captive washers
  • Grounding stud
  • Beveled corners
  • Black textured powder coat finish
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-rpsbr;image of yl-rpsbr;image of yl-rpsbr
    RPSB-RYL-RPSBR

    Key Features

  • 1U x 19" wide rackmount panel with mounted switch
  • Maintained closure
  • Rear connection termination strips
  • Rocker switch
  • One LED status indicator (On)
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-ler4432;image of yl-ler4432
    LER-4432YL-LER4432

    Key Features

  • Configurable top with 12U opening includes riveted 10-32 threaded rails for 19"panels
  • Welded sides with vents
  • Open front (optional door)
  • Recessed rear door with keyed locks
  • Two-pairs fully adjustable rails tapped 10-32 (printed RU scale)
  • Cable Management- Multiple lacing points, laser-cut knockout panels
  • Pilot Point screws with captive washers
  • Grounding stud
  • Threaded inserts (for optional leg levelers)
  • Beveled corners
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-kl100dw;image of yl-kl100dw;image of yl-kl100dw
    KL100-DWYL-KL100DW

    Key Features

  • Power Rating- 100W
  • Attenuation- 3dB per step (33dB total)
  • Use With- 25V/70V speaker line
  • Activation- Key
  • Volume Positions- 0-10
  • Two steps of 6dB each before off
  • Termination- Phoenix-style
  • Wire Capacity- 14-gauge
  • Wall Plate- 1-gang decorator style
  • Finish- White
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-d1p1;image of yl-d1p1
    D1P-1YL-D1P1

    Key Features

  • 18-gauge steel
  • One (1) punch for low-voltage decorator style devices mounted horizontally
  • Black powder coat finish
  • Kep nut hardware
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-lwr1223;image of yl-lwr1223;image of yl-lwr1223;image of yl-lwr1223
    LWR-1223YL-LWR1223

    Key Features

  • Backbox- 5.80" deep with keyhole mounting slots on 16" centers, center opening to mount over electrical pull boxes, ground stud, embossed dimples on back plane for installation of board-mounted accessories, laser-cut knockout panels on top/bottom, and two keyed side locks
  • Front Mounting Section- Fully gusseted corners, triple formed wrap design mounts to backbox from inside with two heavy duty spring-loaded L-pins (self seating, positive locking)
  • Welded sides with vents
  • Beveled front corners
  • Knockouts for wireless antennas
  • One pair adjustable mounting rails tapped 10-32
  • Integral top/bottom rails on E.I.A. spacing for mounting or lacing
  • Black wrinkle textured powder epoxy finish
  • Pilot Point screws with captive washers
  • Grounding stud
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-luhbox
    LUH-BOXYL-LUHBOX

    Key Features

  • Material-20-gauge stainless steel with welded seams
  • Network Grey powder epoxy finish
  • Size- 10.5" square
  • Depth-4"
  • Variety of mounting holes (hardware to be furnished by installer)
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-us110;image of yl-us110;image of yl-us110;image of yl-us110
    US-110YL-US110

    Key Features

  • Height-1U-4U
  • Width- 19" (17.56" useable)
  • Depth- 10.75" or 14"
  • Material- 16-gauge steel
  • Finish- Smooth black
  • Front and rear flanges
  • Load Capacity- 50 lb
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-lwbr2428;image of yl-lwbr2428
    LWBR-2428YL-LWBR2428

    Key Features

  • Cabinet with welded sides opens with a single-release grasp,then pivots smoothly on stainless steel ball transfers,swinging 90 degrees to access equipment connections (field-changeable to Left hand swing). Slam latch closure. Top opening with integral E.I.A. rail accommodates standard 19" accessories or included solid closure panels
  • One pair adjustable mounting rails tapped 10-32
  • Backbox (4.69" deep) mounts on 16" centers. Large central cutout fits over wall obstructions. Laser-cut knockout panel on top has knockouts for wireless antennas and combination knockouts for conduit
  • Support base (4U) has access panels and stainless steel ball transfers to support cabinet
  • Black wrinkle textured powder epoxy finish
  • Pilot Point screws with captive washers
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-lfd7;image of yl-lfd7;image of yl-lfd7
    LFD-7YL-LFD7

    Key Features

  • Extends 1" from rack frame, providing 0.75" space for equipment knobs
  • 20" wide x 1" deep
  • Integral recessed handle
  • Key lock (different than rack’s rear door lock)
  • Mounts left or right
  • 180-degree swing
  • Steel with black wrinkle textured powder epoxy finish
  • Black plugs cover screws for finished appearance
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-luhvrg
    LUH-VRGYL-LUHVRG

    Key Features

  • Material- Cast-aluminum with secondary stainless steel barrier screen
  • Size- 8.02" diameter x 0.78" deep
  • Network Grey powder epoxy finish
  • Four tamper-resistant 8-32 spanner screws (for mounting to Unihorn’s trim ring)
  • Four stainless steel 8-32 nuts (for mounting directly to Unihorn when trim ring is not used)
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-p1x2;image of yl-p1x2
    P1X-2YL-P1X2

    Key Features

  • Material- 20-gauge steel
  • Finish- White
  • Size- 2-gang
  • U-clips
  • Knockouts (0.5")
  • Flanged holes conform to standard wall plate centers
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-lmb32;image of yl-lmb32;image of yl-lmb32;image of yl-lmb32
    LMB-32YL-LMB32

    Key Features

  • Fully-welded 14-gauge steel construction
  • Black wrinkle powder epoxy finish
  • Center opening for cable management
  • For use with LER, LFR and LGR Series racks. NOTE- The 42? deep base has been discontinued and is available in limited quantities
  • Side openings match openings on LGR Series racks for cable pass-through
  • Includes hardware for bolt-on installation
  • Available with standard swivel casters (1400 lb load capacity, increases rack height 1.25") or fine floor swivel casters to protect wood, marble and tile surfaces (800 lb load capacity, increases rack height 1.5")
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-lfd44p;image of yl-lfd44p;image of yl-lfd44p
    LFD-44PYL-LFD44P

    Key Features

  • Extends 1" from rack frame, providing 0.75" space for equipment knobs
  • 20" wide x 1" deep
  • Integral recessed handle
  • Key lock (different than rack’s rear door lock)
  • Mounts left or right
  • 180-degree swing
  • Black plugs cover screws for finished appearance
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-udp314;image of yl-udp314;image of yl-udp314;image of yl-udp314
    UDP-314YL-UDP314

    Key Features

  • Rack Space- 2U, 3U, or 4U
  • Width- 19"
  • Depth- 14.50"
  • 16-gauge steel
  • Smooth black finish
  • Rear bushing
  • Recessed drawer pull, slam latch closure, key lock
  • Load capacity 50 lb
  • Perforated mat liner
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-vr4;image of yl-vr4;image of yl-vr4;image of yl-vr4
    VR-4YL-VR4

    Key Features

  • 16-gauge steel
  • Mount to wall or desk
  • Holds equipment vertically or horizontally
  • One-pair mounting rails tapped 10-32
  • Two rear obrounds for cable management
  • Pilot Point screws with captive washers
  • Smooth black powder epoxy finish
  • Use two racks together for four-point mounting
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    image of yl-acr2009;image of yl-acr2009;image of yl-acr2009;image of yl-acr2009
    ACR-2009YL-ACR2009

    Key Features

  • Power Rating-120V AC, 60Hz, 20A
  • Outlets- 9 (15A/20A) NEMA outlets (1 front, 8 rear)
  • Termination- 9' attached cord with NEMA 5-20P plug
  • Chassis- 19"x 9"x 1.75"(1U)
  • On/off Switch- Rocker switch controls 5 rear outlets (others are always on)
  • Sign In for Dealer Pricing
    Sign In for Dealer Pricing
    Showing 1 - 28 of 226