Vigitron's MaxiiCopper™ Vi2301AU UTP Ethernet extender brings new performance standards to the growing need for high-speed transmission of full bandwidth Ethernet and 90W PoE power over extended distances. The Vi2301AU provides a solution for Multisensor and PTZ domes requiring PoE power between 60W to 70W for a distance up to 900 feet. Its unique Symmetric Bandwidth (SBW™) assures full bandwidth transmission is maintained over the entire specified distance for both upload and download data with Virtual Zero Packet Loss (VZPL™). Bandwidth assurance provides the ability to transmit multiple cameras on single cable runs with no information loss. It can use 1 pair or 4 pairs of UTP and requires no switch setting or network programming. The Vi2301AU is compatible with all Vi2300 series models but in order to benefit from maximum PoE transmission the Vi2301AU needs to be used on both ends of the cable. Extended Pass-Through 90W PoE eliminates the need for additional remote site power while allowing a PoE source, such as a PoE network switch, to provide power to both transceivers and the camera. The Vi2301AU can pass through 802.3bt PoE power up to 90W. It is type-tested under NEMA-TS2 environmental standards for extended operating temperatures between -40°C to +75°C. The Vi2301AU is the perfect solution for extended-distance data and power transmission for warehouses, parking lots, campuses, casinos, etc. MaxiiCopper's Vi2301AU is low power and can easily fit inside most cameras' housings and junction boxes. Best of all, it is MegaPixel Certified (MPC™), the type tested to network packet performance standards, and major camera brand compatibility tested to assure error-free and reliable operations.