Product Overview
The Russound P125 is a 2-channel dual source power amplifier with auto-source switching. It features Primary and Secondary audio line inputs with a loop out to another zone, receiver, or device from the secondary source. A speaker-level input can be connected and assigned as either the primary or secondary source. This amplifier can be used for power upgrades in zones for large speaker selector or volume control systems. The P125 is rated at 125 watts per channel into 4 ohms, and 80 watts into 8 ohms. With the Stereo/Bridge Mono switch in the Bridge Mono position, both amplifier channels are combined for a higher powered mono output. In Bridge mode the X125 is rated at 250 watts of power into a single 8 ohm load. The 12V Trigger In/Out allows the amplifier to be activated by other devices or to activate other electronics via a 3.5 mm mini phone plug cable, with 100mA current capability.
General Information
Name : Russound P125 2-Channel, 125W Dual Source Amplifier , Russound
Category : Amplifiers
UPC Code : 612934536274
Country of Origin : China. Country of origin is subject to change.
Specifications
General Information
ADI Part Number : RD-P125
Brand Name : Bogen
Manufacturer : Russound/FMP, Inc
Manufacturer Part Number : P125
Product Model : P125
Product Name : Dual Source Power Amplifier (80/125W) P125
Product Series : P
Product Type : Amplifier
Technical Information
Audio Channels : 2
Impedance : 4 ohms
Audio
Maximum Frequency Response : 20 kHz
Minimum Frequency Response : 20 Hz
RMS Output Power : 250W
Interfaces/Ports
Number of Analog Audio Inputs : 4
Physical Characteristics
Color : Black
Depth : 13.8"
Height : 3.5"
Weight (Approximate) : 25.60 lb
Width : 16.5"
Power Description
Input Voltage : 115V AC
Product Information
Length : 13.8"
Miscellaneous
Country of Origin : CN
Environmentally Friendly : Yes
Indoor/Outdoor : Outdoor
