Pro Audio Processors
Filter Results
Showing 1 - 28 of 90
content loaded
Sign In for Dealer Pricing
SPA-D1000|SQ-SPAD1000
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
AC-AEX-KIT|8A-ACAEXKIT
Sign In for Dealer Pricing
DBXZC3V|XQ-DBXZC3V
Sign In for Dealer Pricing
AC-MXNET-1G-DANTE-EV2|8A-1GDANEEV2
Sign In for Dealer Pricing
AC-AXION-IN-AUDIO|8A-ACAXIONIO
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
Sign In for Dealer Pricing
B-220-DACOG-B220DAC
Key Features
- Converts 2-ch PCM to analog for multi-room audio
- Features both optical and coaxial inputs
- Ideal for devices without analog outputs
Sign In for Dealer Pricing
Sign In for Dealer Pricing
280512ZX-280512
Key Features
- Converts Coaxial or Toslink digital audio signals to analog L/R Audio
- Supports sAling rate at 32- 44.1- 48- and 96 KHz
- 24-bit S/PDIF incoming bit stream on le' and right channels
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SPA-D1000SQ-SPAD1000
SPA-D1000|SQ-SPAD1000
Sign In for Dealer Pricing
Sign In for Dealer Pricing
DBX641MV9D-ZNPRO64M
Key Features
- Microphone Gain on Channels 1-4
- Pre-Configured Architecture
- Two Configurable Input Insert Positions
Sign In for Dealer Pricing
Sign In for Dealer Pricing
AZMP4 CANV4-AZMP4
AZMP4 CAN|V4-AZMP4
Sign In for Dealer Pricing
Sign In for Dealer Pricing
AD11AU6E-AD11AU
AD11AU|6E-AD11AU
Key Features
- In-line 2-Channel analogue audio delay with line-level volume control
- Supports 48KHz / 24 bit sample rates
- Selectable audio delay from 50-1, 000 ms
Sign In for Dealer Pricing
Sign In for Dealer Pricing
DCI4X600XQ-DCI4X600
DCI4X600|XQ-DCI4X600
Key Features
- Based on Crown's proprietary and patented DriveCore technology, these amplifiers are the next generation of PWM technology using cutting edge Class D amplifier topologies
- True Rack Density power points of 300W or 600W in 2/4/8 channel configurations and 1250W in 2/4 channel configurations with bridgable outputs of 300- 2500W, all in a 2U form factor
- Minimum Guaranteed Power Ratings guaranteed to deliver at least the rated power in the specifications over a longer period of time than any other competing amplifier
Sign In for Dealer Pricing
Sign In for Dealer Pricing
BLU-806XQ-BLU806
Key Features
- Four Input / Output Card Slots
- Configurable Inputs / Outputs
- Analog Inputs (with Phantom Power per Channel)
Sign In for Dealer Pricing
Sign In for Dealer Pricing
93402420015358G-DAC12AU
Sign In for Dealer Pricing
Sign In for Dealer Pricing
IR-800D QV65-IR800DQV
IR-800D QV|65-IR800DQV
Key Features
- Small form factor and simple installation
- Compatible with any version of the IR-800 System
- Band-Pass Frequency 3.0 - 6.0 MHz
Sign In for Dealer Pricing
Sign In for Dealer Pricing
RU-NL4PRL-RUNL4P
Key Features
- Converts Four Dante Network Audio Signals to Professional Line Level
- Line-Level Outputs Provide +4 dBu with 18 dB Headroom
- Exceptional Low-Noise and Low-Distortion Performance
Sign In for Dealer Pricing
Sign In for Dealer Pricing
IP-A1RM Y E0065-IPA1RMYE0
Key Features
- Ideal gateway for IP paging solutions
- LCD with up to 50 virtual buttons
- Supports single device calls and group paging
Sign In for Dealer Pricing
Sign In for Dealer Pricing
DA44AU6E-DA44AU
Key Features
- Features 4 x analogue audio inputs that are converted to a Dante compatible signal
- Features conversion of 4 x Dante signals to analogue audio outputs
- Analogue audio inputs support both balanced and unbalanced audio + MIC line level signals
Sign In for Dealer Pricing
Sign In for Dealer Pricing
AZMP8 CANV4-AZMP8
AZMP8 CAN|V4-AZMP8
Sign In for Dealer Pricing
Sign In for Dealer Pricing
RU-LB2RL-RULB2
Key Features
- Converts Standard Line-Level Audio Sources to Dante Network Channels
- Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with 18 dB Headroom
- Front-Panel Gain Adjustment with Dual-LED VU Meter for Each Audio Input
Sign In for Dealer Pricing
Sign In for Dealer Pricing
HR-ADC1RL-HRADC1
Key Features
- Broadcast Quality Analog to Digital Audio Conversion
- Inputs Balanced and Unbalanced Stereo Audio
- Adjustable Audio Input Gain Trim
Sign In for Dealer Pricing
Sign In for Dealer Pricing
DBX260VXQ-DBX260V
Key Features
- Feedback Elimination
- 2.7 Seconds of Alignment and Zone Delay
- RS-232 PC GUI control
Sign In for Dealer Pricing
Sign In for Dealer Pricing
AC-AEX-KIT8A-ACAEXKIT
AC-AEX-KIT|8A-ACAEXKIT
Key Features
- Uncompressed stereo audio extension up to 100 m over Cat5e or higher
- Supports analog and digital inputs with dipswitch selection
- Dual active audio outputs for simultaneous analog and digital playback
Sign In for Dealer Pricing
Sign In for Dealer Pricing
DBXPA2-VXQ-DBXPA2V
Key Features
- Optimizes and protects loudspeakers
- Advanced AutoEQ and AFS algorithms
- Input delay module for FOH system
Sign In for Dealer Pricing
Sign In for Dealer Pricing
DBXZC3VXQ-DBXZC3V
DBXZC3V|XQ-DBXZC3V
Key Features
- Programmable Volume Control
- Program or Scene Selection
- Programmable Contact Closure Interface
Sign In for Dealer Pricing
Sign In for Dealer Pricing
RU-NL2RL-RUNL2
RU-NL2|RL-RUNL2
Key Features
- Converts Two Dante Network Audio Signals to Professional Line Level
- Line-Level Outputs Provide +4 dBu with 18 dB Headroom
- Exceptional Low-Noise and Low-Distortion Performance
Sign In for Dealer Pricing
Sign In for Dealer Pricing
AC-MXNET-1G-DANTE-EV28A-1GDANEEV2
AC-MXNET-1G-DANTE-EV2|8A-1GDANEEV2
Key Features
- Adds Dante audio encoding to MXnet Evolution II for flexible endpoints and consolidated wiring
- Supports long-haul Dante audio transport with break-out bridge endpoints
- Cool-running, fan-free design integrating Dante I/O software for thermal efficiency
Sign In for Dealer Pricing
Sign In for Dealer Pricing
AC-AXION-IN-AUDIO8A-ACAXIONIO
AC-AXION-IN-AUDIO|8A-ACAXIONIO
Key Features
- Dual RCA analog 2-channel and digital mini-TOSLINK inputs
- Selectable analog or digital operation for Input A and Input B
- ADC-DSP chip converts analog input into digital
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SF-ND2RL-SFND2
Key Features
- Converts 2 Dante network audio signals to Left / Right digital audio
- AES / EBU or S / PDIF coaxial or optical output
- Selectable Dante sample rates; 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Sign In for Dealer Pricing
Sign In for Dealer Pricing
SF-NL2RL-SFNL2
Key Features
- Converts 2 Dante audio signals to balanced analog outputs
- Selectable output levels: line or mic (-50 dB)
- No special software needed for configuration
Sign In for Dealer Pricing
Sign In for Dealer Pricing
RU-LB4PRL-RULB4P
Key Features
- Converts Standard Line-Level Audio Sources to Dante Network Channels
- Line-Level Inputs Accept Unbalanced -10 dBV or Balanced +4 dBu Signals with > 18 dB Headroom
- Front-Panel Gain Adjustment with Dual-LED VU Meter for Each Audio Input
Sign In for Dealer Pricing
Sign In for Dealer Pricing
DCNM-APS2UF-DCNMAPS2
Key Features
- Zero network configuration
- Fully compatible to the Ethernet (IEEE802.3) and OMNEO standard
- Supports loop-through connection with cable redundancy
Sign In for Dealer Pricing
Sign In for Dealer Pricing
IP-A1PGE0065-IPA1PGE00
Key Features
- Convert SIP audio, ONVIF Audio Backchannel, internal audio files or local audio source into Multicast streaming
- System mute function to mute all broadcasts made by every single IP-A1 Series devices within the same network
- 1-Local audio input (LINE/MIC selectable, phantom power On/Off)
Sign In for Dealer Pricing
Sign In for Dealer Pricing