Detector Bases

Bosch FCA-350-B6R24 6" Detector Base, 4-Wire, 24V

FCA-350-B6R24|DS-FCA350B6R

Secutron MRI-4001 6" Detector Base

MRI-4001|5T-MRI4001

Federal Signal DBLP Deep Base, Off-White

DBLP|QF-DBLP

Kidde KC2-RB KC2 Series Relay Base, 4-Terminals, Auxiliary Relay, 4" Diameter

KC2-RB|ED-KC2RB

Bosch FCA-350-B6R12 6" Detector Base, 4-Wire, 12V

FCA-350-B6R12|DS-FCA350B61

Kidde Commercial

Kidde KC2-SB Standard Smoke Detector Base, Compatible with AEGIS 2.0 and AEGIS-XLT

KC2-SB|ED-KC2SB

federal signal rsl-bp-gy mounting base for security strobe light - gray

Federal Signal RSL-BP-GY Pipe Mounting Base, 1/2"NPT Female, Accepts Male Thread, Gray

RSL-BP-GY|QF-RSLBPGY

Potter AB-6 6" Addressable Detector Base

AB-6|PL-AB6

Federal Signal SLMBS-012-024R SLMBS StreamLine Shallow Base, 12-24VDC, Red

SLMBS-012-024R|QF-SLMS1224R

Napco FWC-FSLC-SMK6B Addressable 6" Mounting Base

FWC-FSLC-SMK6B|NA-FWCSLC6B

Napco FW-2-E-HEAD Conventional Photoelectric Smoke Detector Head

FW-2-E-HEAD|NA-FW2EHEAD

Napco FW-2-EH6-BASE FIREWOLF 6" Included Separable Detector Base for FW-2-E Smoke Detector

FW-2-EH6-BASE|NA-FW2EH6BAS

Napco FW-4-EHSC-BASE 6" Mounting Base for Conventional 4-Wire Detector

FW-4-EHSC-BASE|NA-FW4EHSCBA

Bosch D290 4-Wire Base, 24V DC

D290|DS-D290

Kidde EC2-SB4 EC2 Series 4" Standard Base, Edwards

EC2-SB4|3K-EC2SB4

Kidde EC2-SB EC2 Series Standard Base, Edwards

EC2-SB|3K-EC2SB

Potter PAD300-LFSB Addressable Low Frequency Sounder Base

PAD300-LFSB|PL-PAD300LFB

Fire-Lite B300A-6-IV 6" Intelligent Sounder Base, Ivory

B300A-6-IV|FL-B300A6IV

Macurco

Macurco MA-CM-E1 Round Housing Base for MA-CME1R

70-2900-1361-2|MA-CME1RNDBS

Potter PAD300-RB 6" Addressable Relay Base, Low profile, Surface-mount, One form relay, White

PAD300-RB|PL-PAD300RB

Potter PAD300-6DB 6" Detector Base, Low profile, Surface-mount, White

PAD300-6DB|PL-PAD3006DB

Potter SB-46 SB Series 46mA Draw at 24VDC Smoke Detector Base

SB-46|PL-SB46

More Options Available

Potter PAD300-LFSB Addressable Low Frequency Sounder Base, Low profile, Surface-Mount, Independent Device, White

PAD300-LFSB|PL-PAD300SB

Potter PAD300-4DB 4" Detector Base, Low profile, Surface-mount, White

PAD300-4DB|PL-PAD3004DB

Potter PAD300-IB 6" Isolator Base, Low profile, Surface-mount, Locking, White

PAD300-IB|PL-PAD300IB

Potter PAD300-SB 6" Addressable Sounder Base, Low profile, Surface-mount, Independent device, White

PAD300-SB|PL-PAD30SB

WAV-RLFL-WAVRL

Fire-Lite Alarms by Honeywell

Fire-Lite WAV-RL Swift AV Base Wall Heat Detector, Red

WAV-RL|FL-WAVRL

Key Features

Wireless installation

Class A mesh network

Addressable code wheels

Commercial applications

Listed to UL 464, UL 1638, UL 1971, CAN/ULC S525, CAN/ULC S526, and CSA C22.2 No. 205

Frequency hopping

Bi-Directional Communications

MXFBASE3W-MXFBASE

DSC

DSC MXBASE Addressable MX Fire Base for MX916, MX926, MX936 Detectors

MXFBASE|3W-MXFBASE

Key Features

Base for MX916, MX926, MX936 detectors

4 terminals for loop connection

LED aperture

FCA-350-B6R24DS-FCA350B6R

Bosch FCA-350-B6R24 6" Detector Base, 4-Wire, 24V

FCA-350-B6R24|DS-FCA350B6R

Key Features

Use for 2-wire (12V DC or 24V DC system) applications

Easy installation

Interchangeable detector heads

MRI-40015T-MRI4001

Secutron MRI-4001 6" Detector Base

MRI-4001|5T-MRI4001

Key Features

Sleek low profile design

Ceiling or wall mountable

The base provides a device Anti-Tamper feature

Open style mounting bases offer easy wiring and low pressure docking

Save time with multiple mounting options

DBLPQF-DBLP

Federal Signal DBLP Deep Base, Off-White

DBLP|QF-DBLP

KC2-RBED-KC2RB

Kidde KC2-RB KC2 Series Relay Base, 4-Terminals, Auxiliary Relay, 4" Diameter

KC2-RB|ED-KC2RB

Key Features

Dual Rate-of-Rise and Fixed-Temperature Sensor

Self-diagnostic capability continually monitors operation

Compatible with Kidde Fire Systems AEGIS 2.0 and AEGIS-XLT Conventional Control Units

Remote LED indicator available

Low-profile design blends into the ceiling

FM Approved

California State Fire Marshal Listed

cULus Listed

FCA-350-B6R12DS-FCA350B61

Bosch FCA-350-B6R12 6" Detector Base, 4-Wire, 12V

FCA-350-B6R12|DS-FCA350B61

Key Features

Use for 2-wire (12 VDC or 24 VDC system) applications

Interchangeable detector heads

Operating temperature: 0°C to 49°C

43mA (58mA at 30V)

15.24cm(H) x 15.24cm(W) x 2.54cm(D)

KC2-SBED-KC2SB

Kidde Commercial

Kidde KC2-SB Standard Smoke Detector Base, Compatible with AEGIS 2.0 and AEGIS-XLT

KC2-SB|ED-KC2SB

Key Features

Compatible with AEGIS 2.0 and AEGIS-XLT

Connects Optica KC2 series detectors

Supports fire alarm initiating device circuits

Includes terminals for remote alarm indicator

Standard smoke detector base for reliable performance

RSL-BP-GYQF-RSLBPGY

Federal Signal RSL-BP-GY Pipe Mounting Base, 1/2"NPT Female, Accepts Male Thread, Gray

RSL-BP-GY|QF-RSLBPGY

Key Features

Pipe Mounting Base for 1/2" NPT pipe

Accepts Male Thread

Gray Color

Durable Construction

Easy Installation

AB-6PL-AB6

Potter AB-6 6" Addressable Detector Base

AB-6|PL-AB6

Key Features

6" base for smoke or heat Sensor mounting

Intuitive terminal markings for easy installation

Compatible with 14 to 22 AWG wire

Wide coverage area for complete back box coverage

Mounts on single, double, octagon, or 4" square boxes

SLMBS-012-024RQF-SLMS1224R

Federal Signal SLMBS-012-024R SLMBS StreamLine Shallow Base, 12-24VDC, Red

SLMBS-012-024R|QF-SLMS1224R

FWC-FSLC-SMK6BNA-FWCSLC6B

Napco FWC-FSLC-SMK6B Addressable 6" Mounting Base

FWC-FSLC-SMK6B|NA-FWCSLC6B

Key Features

Designed for use with all NS analog sensors

Available in 4'' and 6'' models

Contains a security locking tab for tamper protection

FW-2-E-HEADNA-FW2EHEAD

Napco FW-2-E-HEAD Conventional Photoelectric Smoke Detector Head

FW-2-E-HEAD|NA-FW2EHEAD

Key Features

Photoelectric smoke detection using an IR LED, blue LED, and photodiode

Enhanced with a blue LED to reduce sensitivity to non-fire particles and increase fire detection accuracy

8.5 to 33VDC

Low power consumption in standby mode

Activates upon smoke detection

Quick startup for immediate readiness

FW-2-EH6-BASENA-FW2EH6BAS

Napco FW-2-EH6-BASE FIREWOLF 6" Included Separable Detector Base for FW-2-E Smoke Detector

FW-2-EH6-BASE|NA-FW2EH6BAS

Key Features

Specifically designed for the FW-2-E smoke detector

2-Wire conventional base

Separable base for easy installation and maintenance

Fire alarm systems in commercial and residential settings

Durable materials suitable for long-term use

FW-4-EHSC-BASENA-FW4EHSCBA

Napco FW-4-EHSC-BASE 6" Mounting Base for Conventional 4-Wire Detector

FW-4-EHSC-BASE|NA-FW4EHSCBA

Key Features

Standard size for compatibility with most junction boxes and ceiling mounts

Supports conventional wiring for smoke and heat detectors

Built to meet commercial fire safety standards

Designed for quick and secure mounting of FW-4 series detector heads

D290DS-D290

Bosch D290 4-Wire Base, 24V DC

D290|DS-D290

Key Features

24V DC, four-wire circuit compatibility

Dual Form C relays

Low profile construction

Easy to install and service

Molded in UL Listed white ABS plastic

EC2-SB43K-EC2SB4

Kidde EC2-SB4 EC2 Series 4" Standard Base, Edwards

EC2-SB4|3K-EC2SB4

EC2-SB3K-EC2SB

Kidde EC2-SB EC2 Series Standard Base, Edwards

EC2-SB|3K-EC2SB

PAD300-LFSBPL-PAD300LFB

Potter PAD300-LFSB Addressable Low Frequency Sounder Base

PAD300-LFSB|PL-PAD300LFB

B300A-6-IVFL-B300A6IV

Fire-Lite B300A-6-IV 6" Intelligent Sounder Base, Ivory

B300A-6-IV|FL-B300A6IV

Key Features

Keeps your system optimally maintained with a predictable total cost of ownership

Features phone support service that helps you handle any mishaps

1 Year service duration to ensure maximum productivity and deliver timely results

70-2900-1361-2MA-CME1RNDBS

Macurco

Macurco MA-CM-E1 Round Housing Base for MA-CME1R

70-2900-1361-2|MA-CME1RNDBS

Key Features

CM-E1 Rounding Housing Base

Low replacement costs with long-life sensors

Low maintenance with no calibration needed

Local alarm – Temporal 4 Sounder

Clip in wire harness for in and out replacement

Aesthetically pleasing. Flush mount or surface options

Ties into any Fire/Burglary panel for local and remote monitoring

Made in America

UL 2075 Listed

PAD300-RBPL-PAD300RB

Potter PAD300-RB 6" Addressable Relay Base, Low profile, Surface-mount, One form relay, White

PAD300-RB|PL-PAD300RB

Key Features

UUKL Listed for Smoke Control

Does not require SLC Loop address

Terminals accept 22 to 12 AWG wire sizes

One form C relay as part of the base assembly

Relay rating: 2A @ 30VDC, 0.5A @ 125VAC

Works independent of the detectors attached

May be mapped to any device connected to the Control Panel

LED to indicate that the unit is active

Separation included in the base for high and low voltage and power limited/non-power limited connections

Supports Class A, Class X and Class B wiring

PAD300-6DBPL-PAD3006DB

Potter PAD300-6DB 6" Detector Base, Low profile, Surface-mount, White

PAD300-6DB|PL-PAD3006DB

Key Features

Terminals marked with polarity to assist with installation

Duplicate terminals for in-and-out SLC wiring

Terminals accept 22 to 12AWG wire sizes

Installs on Single Gang, Double Gang, Octagon or 4" Square Box

Locking tab prevents unauthorized detector removal

6" Mounting base comes with trim plate cover

6” mounting base comes with trim plate cover

SB-46PL-SB46

Potter SB-46 SB Series 46mA Draw at 24VDC Smoke Detector Base

SB-46|PL-SB46

Key Features

46mA draw at 24V DC

Polarized smoke detector base

Current limiting resistor

Blocking diode

Designed for the IS-24, PS-24 and PS-24H smoke detectors

Compatible with all Potter release panels (except 3000, 5000 and 9000 panels)

More Options Available

PAD300-LFSBPL-PAD300SB

Potter PAD300-LFSB Addressable Low Frequency Sounder Base, Low profile, Surface-Mount, Independent Device, White

PAD300-LFSB|PL-PAD300SB

Key Features

Terminals accept 22 to 12 AWG wire sizes
Supports Class A, Class X and Class B wiring
UUKL Listed for smoke control
Addressable low frequency sounder base, allows for single station, grouped or all call activation
May be mapped to any device connected to the control panel
Does not require SLC Loop address, uses PAD sub point addressing feature
Complies with the Low Frequency Signal Requirements per NFPA 72 and UL 464 for Audible Signaling Devices
24 VDC Sounder base power connection supervised internally by each sounder base. No external power supervision relays required

PAD300-4DBPL-PAD3004DB

Potter PAD300-4DB 4" Detector Base, Low profile, Surface-mount, White

PAD300-4DB|PL-PAD3004DB

Key Features

Terminals marked with polarity to assist with installation

Duplicate Terminals for In-and-out SLC Wiring

Terminals accept 22 to 12 AWG wire sizes

PAD300-IBPL-PAD300IB

Potter PAD300-IB 6" Isolator Base, Low profile, Surface-mount, Locking, White

PAD300-IB|PL-PAD300IB

Key Features

Isolator integrated into base

Self restoring

Red LED indication of short circuit

Terminals accept 22 to 12 AWG wire sizes

Supports Class A, Class X and Class B wiring

Does not require SLC Loop address

UUKL Listed for Smoke Control

PAD300-SBPL-PAD30SB