Product Overview
SCLASS Unified Power Systems are engineered to house FlexPower power modules alongside SWH iSTAR access hardware in one compact listed enclosure. This unit is a 12V and 24V DC dual voltage control access power system.
Two C8 control modules provide sixteen access control inputs capable of voltage or dry contact activation, and sixteen outputs programmable for failsafe / failsecure operation at either 12 or 24 VDC and controlled by the integrated fire alarm interface circuit on the FPO. Two D8 modules provide sixteen auxiliary outputs and each output is configurable for 12 or 24VDC operation.
Specifications
Input Power
- Input 120/230 VAC 50/60 Hz | 452 Watts
- Overload and short circuit protection
- Over temperature protection
- Polarized AC power supply disconnect
Output Power
- FPO150: 12V/12A or 24V/6A | 150 Watts
- FPO250: 12V/20A or 24V/10A | 250 Watts
- Outputs: Continuous (DC1) Resettable (DC2)
- 16 lock control lock outputs, fused at 3A each
- 16 auxiliary outputs, fused at 3A each
- 120 mV output voltage ripple
- System Efficiency: 87% | System BTU Rating: 175 BTU/Hr
Battery Charging
- Independent built-in 2A charger for sealed lead acid or gel type batteries
- Microprocessor dual rate charging of 12 or 24 V battery sets
- Charges up to 80Ah battery sets within UL limit
- Automatic switchover to standby battery when AC fails
- Zero voltage drop when switched over to battery backup
Supervision
- AC Fail (form "C" contacts)
- System Fault (form "C" contacts) may be triggered by low/no battery, short to earth ground, power supply failure or blown fuse
Visual Indicators
- AC input, DC1 and DC2 output
- System fault | AC fault | Short to earth ground | Reverse battery polarity
- Fire Alarm Input activated
- D8: DC outputs
- C8: DC outputs and fault
Regulatory Compliance
- UL294, UL603, UL1076
- ULC S318, ULC S319, CSA C22.2 #107.1, CSA C22.2 #60950
- CE | FCC Part 15, Subpart B | CSFM Approved
Enclosure Dimensions
- Size: 36.00H x 30.00W x 4.50D in. (91.00 x 76.00 x 11.50 cm)
Access Mounting
- SWH Pro or ULTRA Controllers
General Information
Name : LifeSafety Power FPO150/250-2C8P2D8PE8S SWH 16-Door Auxiliary Class II Distribution Outputs Access Control Power Supply in UL Listed Indoor, 30" x36" x6.5" D Enclosure , LifeSafety Power
Category : Power Supplies
UPC Code : 815481022805
Country of Origin : United States. Country of origin is subject to change.
Specifications
General Information
ADI Part Number : J7-1252CDP8S
Manufacturer Part Number : FPO150/250-2C8P2D8PE8S
Product Type : Power Supply
Sector : Access Control
Technical Information
Output Voltage : 12V DC, 24V DC
Power Description
Input Voltage : 120V AC, 230V AC
Output Power : 400 W
Miscellaneous
Country of Origin : US
